ASRock P4i65g+ and Celeron D 315 problems

[cangriman86]

I recently bought a new, never-been-opened Celeron D 315 to put into my P4i65g+ mobo. I'd done a bit of research and was pretty confident it was going to work. So, I plug it in, power up and I hit the first problem: it hangs once it tries to boot Windows (WinXP SP2) -- it won't even show a windows splash screen. As soon as the system load goes from the mobo to the processor, it hangs. Sometimes, if it's feeling generous, it will let me hit F11 and pick a drive to boot from, and I can boot up Windows that way (c:\ aka Windows is my only boot drive). Invariably, when in Windows, it will run fine for about 5-10 minutes, and then hang. Dead. Nothing.

At first I thought it was a BIOS issue, so I updated to the latest version (1.7) but still the same thing occurs.

Is it a compatibility issue? Am I missing something in my BIOS settings? Has this occurred with anyone else?

[plexer]

Have you put your old chip back in to make sure it's the chip and not something else you may have accidently damaged on the board maybe when install the processor?

Ben

[plexer]

Thanks for the constructive comments DHCP now get back to allocating IP addresses.

Ben