Hardware Thread, Ethernet Status LEDs... HELP!! in Technical; HELP!!!!
Our main file server has a really wierd error with the network port. Both the activity LED and the ...
6th May 2008, 10:21 AM #1
Ethernet Status LEDs... HELP!!
Our main file server has a really wierd error with the network port. Both the activity LED and the Link LED are flashing at the same time but for 3 short flashes. The network port will not receive any information
Has anyone else had this problem?
6th May 2008, 10:24 AM #2
What make/model is the server?
What make/model is the motherboard?
What make/model is the nic?
6th May 2008, 10:27 AM #3
6th May 2008, 10:39 AM #4
Any bios updates etc... been done to it?
Is it on a ups?
6th May 2008, 10:39 AM #5
Checked for network loop.
6th May 2008, 10:46 AM #6
No to all the answers, as i have got the other port working fine as the server as 2 ports but only runs at 100mb where as the one that is broken runs at 1Gb and hp support are useless
6th May 2008, 10:49 AM #7
What device was the other end plugged in to? have you checked the server nic with something else that runs a 1000mbp?
Was the port manually set or auto negotiate?
6th May 2008, 11:01 AM #8
think ive found the problem.. NIC has failed
7th May 2008, 12:18 AM #9
Yup from what I recall in the HP fault book that is a faulty NIC. Time for a new mobo then
By istanlfc in forum Hardware
Last Post: 3rd September 2009, 09:58 PM
By callumtuckey in forum General Chat
Last Post: 12th June 2007, 10:10 AM
By timbo343 in forum Wireless Networks
Last Post: 20th May 2007, 09:58 PM
By _Bat_ in forum Hardware
Last Post: 4th May 2007, 07:54 PM
By sqdge in forum Wireless Networks
Last Post: 5th April 2007, 05:09 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)