Hardware Thread, colour printing from pageplus in Technical; We do some colour printing from within Pageplus which takes ages to process on an OKI C5300 colour printer. The ...
8th November 2007, 03:07 PM #1
colour printing from pageplus
We do some colour printing from within Pageplus which takes ages to process on an OKI C5300 colour printer. The pp documents aren't particularly large (between 3 and 5MB typically) but they are colour intensive e.g full colour backgrounds. The OKI is equipped with 64MB RAM
which is fine for most printing tasks and enables us to print duplex.
What kind of upgrade will most help with reducing this processing time for these pp documents in particular. I've got a Kyocera FS-C5030N which i could replace the oki with, the kyocera has 128MB RAM and I can either add additional memory and/or add an internal hard disk. Which upgrade step is likely to make the most difference - HD or memory upgrade ?
Or any other suggestions for speeding up the printing if at all possible ?
Print jobs are spooled on a Windows 2003 box, and the printer is connected to the network at 100mbps. All other documents print within the suggested ppm estimates given by manufacturer (colour and bw). Printing these colour pageplus documents is insanely slow
By UBBERgoose in forum Windows
Last Post: 17th October 2008, 05:14 PM
By Oops_my_bad in forum Hardware
Last Post: 12th September 2007, 10:08 AM
By ITWombat in forum *nix
Last Post: 11th June 2007, 09:25 AM
By Grommit in forum Windows
Last Post: 23rd February 2007, 01:40 AM
Last Post: 6th October 2006, 10:03 AM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)