Hardware Thread, Samsung CLX-4195FN keeps initalising in Technical; We have a Samsung CLX-4195FN which serves as the fax machine and printer for our reception desk. It's relatively new ...
24th March 2013, 12:14 PM #1
Samsung CLX-4195FN keeps initalising
We have a Samsung CLX-4195FN which serves as the fax machine and printer for our reception desk. It's relatively new and does a good job apart from the fact that recently after switching it comes up as ready but then it keeps initalising every few minutes?
IDG Tech News
24th March 2013, 06:56 PM #2
What thee flipping thing is doing is it's switching on and going through it's initialisation tests then just after it gets to the 'ready' stage it reboots itself and starts the initialisation all over again.
Clearly it needs to be rerturned to Samsung which is a pain and will leave us eithout a fax till it's fixed. Anyone got other suggestions please?
Last edited by speckytecky; 24th March 2013 at 11:35 PM.
24th March 2013, 07:10 PM #3
Double check that the power lead is securely connected. Shoving it firmly in place to make sure it's not wobbly may be all that's required.
Thanks to elsiegee40 from:
speckytecky (24th March 2013)
25th March 2013, 10:24 AM #4
Just checked (some numpty yes me) did have it plugged into a surge protector but rep lugging it direct to the mains and checking the cable the darned thing continues to switch itself off and on again all the time.
Originally Posted by elsiegee40
By ninjabeaver in forum General Chat
Last Post: 28th July 2013, 11:03 PM
By Appothis in forum Windows
Last Post: 10th June 2013, 01:25 PM
By localzuk in forum Windows
Last Post: 4th December 2012, 10:13 AM
By MatthewL in forum Hardware
Last Post: 6th June 2012, 01:40 PM
By bensewell in forum Netbooks, PDA and Phones
Last Post: 20th July 2010, 10:52 AM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)