Hardware Thread, Smartboard USB lead in Technical; Hello all,
On the back of a Smartboard there's the main circuit board which powers the LED (Red, Orange, Green), ...
25th September 2012, 03:37 PM #1
Smartboard USB lead
On the back of a Smartboard there's the main circuit board which powers the LED (Red, Orange, Green), but also where the USB cable connects via a USB type A male to type B female as illustrated below:
Typically the wire is approx. 20cm in length, but all I can find is the above image which won't fit.
You'd then plug in a standard USB type A male to B male, or in other words a printer cable. If anyone can find a USB type A male to type B female, there's a virtual pint waiting for you!
IDG Tech News
26th September 2012, 09:03 AM #2
26th September 2012, 09:15 AM #3
That's the same thing as he's linked which don't fit.
26th September 2012, 09:17 AM #4
How about a usb a to a cable instead?
26th September 2012, 09:19 AM #5
Or just make your own. Cut the ends off the cables you need. Solder and heatshrink.
26th September 2012, 10:15 AM #6
Thanks for all the replies guys! I did think about a USB type A male to type A male. In theory this should work, but the only way of disconnecting is from the back of the PC itself. A small compromise I suppose
By Kyle in forum Hardware
Last Post: 22nd November 2011, 02:35 PM
By Scorpio in forum AV and Multimedia Related
Last Post: 28th April 2010, 03:39 PM
By macfab in forum Hardware
Last Post: 25th November 2009, 01:21 PM
By laserblazer in forum Hardware
Last Post: 11th September 2009, 11:11 AM
By TechSupp in forum Windows
Last Post: 24th April 2009, 10:19 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)