+ Post New Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 20
General Chat Thread, Car Boot - Marks in General; Ive already washed and T cut my car last week and am not sure but I only noticed them after ...
  1. #1

    mac_shinobi's Avatar
    Join Date
    Aug 2005
    Posts
    9,977
    Thank Post
    3,525
    Thanked 1,107 Times in 1,014 Posts
    Rep Power
    374

    Car Boot - Marks

    Ive already washed and T cut my car last week and am not sure but I only noticed them after taking my car to a garage a few months back after they sprayed and sorted my rear bumper out. Although I honestly cant recall if they were there prior to the work being done or if its me with the hot weather however I've used my car inc boot etc and there aren't any other marks like that on the boot

    Long story short

    1.) what can I do to get rid of the marks?

    2.) would it be worth while asking the garage or just sort it out myself ?

    Thanks

  2. #2

    mac_shinobi's Avatar
    Join Date
    Aug 2005
    Posts
    9,977
    Thank Post
    3,525
    Thanked 1,107 Times in 1,014 Posts
    Rep Power
    374
    Car Boot - Marks-imageuploadedbyedugeek1374926814.138749.jpg
    Car Boot - Marks-imageuploadedbyedugeek1374926827.765545.jpg
    Car Boot - Marks-imageuploadedbyedugeek1374926837.672608.jpg

  3. #3
    round2it's Avatar
    Join Date
    May 2009
    Location
    UK
    Posts
    1,076
    Thank Post
    244
    Thanked 160 Times in 116 Posts
    Rep Power
    41

    Smile

    That's weird finger marks. Tcut should take the top layer off so is it under the lacquer

    Finger print yourself and see if its your print
    Last edited by round2it; 27th July 2013 at 08:31 PM.

  4. Thanks to round2it from:

    mac_shinobi (27th July 2013)

  5. #4

    mac_shinobi's Avatar
    Join Date
    Aug 2005
    Posts
    9,977
    Thank Post
    3,525
    Thanked 1,107 Times in 1,014 Posts
    Rep Power
    374
    Quote Originally Posted by round2it View Post
    That's weird finger marks. Tcut should take the top layer off so is it under the lacquer

    Finger print yourself and see if its your print
    How do I do that. No ink ?

    How can I get rid of them ?
    Last edited by mac_shinobi; 27th July 2013 at 09:59 PM.

  6. #5

    3s-gtech's Avatar
    Join Date
    Mar 2009
    Location
    Wales
    Posts
    2,999
    Thank Post
    156
    Thanked 628 Times in 561 Posts
    Rep Power
    163
    If you use T-Cut, use the metallic version. It's not as harsh, and just works on the lacquer rather than cutting through it.

  7. Thanks to 3s-gtech from:

    mac_shinobi (27th July 2013)

  8. #6

    mac_shinobi's Avatar
    Join Date
    Aug 2005
    Posts
    9,977
    Thank Post
    3,525
    Thanked 1,107 Times in 1,014 Posts
    Rep Power
    374
    Quote Originally Posted by 3s-gtech View Post
    If you use T-Cut, use the metallic version. It's not as harsh, and just works on the lacquer rather than cutting through it.
    @3s-gtech

    Got this one ( see attached image )

    Car Boot - Marks-imageuploadedbyedugeek1374955344.693376.jpg

    Presume that's not the metallic one

  9. #7
    box_l's Avatar
    Join Date
    May 2007
    Location
    Herefordshire
    Posts
    439
    Thank Post
    79
    Thanked 95 Times in 79 Posts
    Rep Power
    63
    That is suncream.

    You will probably find that the marks belong to you or your nearest and dearest.

    You will also have sod all chance of them ever going fully.

    The particle size of suncream gets between the paint polymers.

    Tcut and all the rest do make a difference for a while and with repeated effort you may get somewhere eventually.

    Sorry to bear bad news.

    BoX

  10. Thanks to box_l from:

    mac_shinobi (27th July 2013)

  11. #8

    elsiegee40's Avatar
    Join Date
    Jan 2007
    Location
    Kent
    Posts
    10,038
    Thank Post
    1,894
    Thanked 2,365 Times in 1,742 Posts
    Rep Power
    831
    Quote Originally Posted by box_l View Post
    That is suncream.

    You will probably find that the marks belong to you or your nearest and dearest.

    You will also have sod all chance of them ever going fully.

    The particle size of suncream gets between the paint polymers.

    Tcut and all the rest do make a difference for a while and with repeated effort you may get somewhere eventually.

    Sorry to bear bad news.

    BoX
    I agree. Similar marks on my car

  12. Thanks to elsiegee40 from:

    mac_shinobi (27th July 2013)

  13. #9

    mac_shinobi's Avatar
    Join Date
    Aug 2005
    Posts
    9,977
    Thank Post
    3,525
    Thanked 1,107 Times in 1,014 Posts
    Rep Power
    374
    Quote Originally Posted by elsiegee40 View Post
    I agree. Similar marks on my car
    Annoying. Not anything else I can use or do ?

  14. #10


    Join Date
    Feb 2007
    Location
    51.403651, -0.515458
    Posts
    9,612
    Thank Post
    250
    Thanked 2,899 Times in 2,132 Posts
    Rep Power
    828
    Quote Originally Posted by mac_shinobi View Post
    anything else I can use or do?
    It might be worth posting your question (and photos) on the CleanYourCar or DetailingWorld forums. Someone there should be able to give you more suggestions.

  15. Thanks to Arthur from:

    mac_shinobi (27th July 2013)

  16. #11

    mac_shinobi's Avatar
    Join Date
    Aug 2005
    Posts
    9,977
    Thank Post
    3,525
    Thanked 1,107 Times in 1,014 Posts
    Rep Power
    374
    Quote Originally Posted by Arthur View Post
    It might be worth posting your question (and photos) on the CleanYourCar or DetailingWorld forums. Someone there should be able to give you more suggestions.
    http://www.cleanyourcar.co.uk/forum/...p?f=20&t=20232

  17. Thanks to mac_shinobi from:

    Arthur (27th July 2013)

  18. #12


    Join Date
    Feb 2007
    Location
    51.403651, -0.515458
    Posts
    9,612
    Thank Post
    250
    Thanked 2,899 Times in 2,132 Posts
    Rep Power
    828
    Do you have any Isopropyl Alcohol you can try?

    Edit. eBay is a lot cheaper than Maplins if you need to buy some.
    Last edited by Arthur; 28th July 2013 at 12:09 AM.

  19. Thanks to Arthur from:

    mac_shinobi (27th July 2013)

  20. #13

    mac_shinobi's Avatar
    Join Date
    Aug 2005
    Posts
    9,977
    Thank Post
    3,525
    Thanked 1,107 Times in 1,014 Posts
    Rep Power
    374
    Quote Originally Posted by Arthur View Post
    Do you have any Isopropyl Alcohol you can try?
    Not sure if its IPA but have got something that I purchased last year off of ebay to clean a heatsink will try n find it and see

    Thats not gonna ruin the paint work I presume?

  21. #14


    Join Date
    Feb 2007
    Location
    51.403651, -0.515458
    Posts
    9,612
    Thank Post
    250
    Thanked 2,899 Times in 2,132 Posts
    Rep Power
    828
    I haven't had any issues cleaning things with IPA in the past (although I mainly use it on computers). It might be worth putting a small amount on a cotton bud to start with.

  22. Thanks to Arthur from:

    mac_shinobi (28th July 2013)

  23. #15

    nephilim's Avatar
    Join Date
    Nov 2008
    Location
    Dunstable
    Posts
    12,420
    Thank Post
    1,682
    Thanked 2,036 Times in 1,481 Posts
    Blog Entries
    2
    Rep Power
    460
    Depending on when the paint was done, (older than 5 years old) IPA will ruin the paintwork laquer and make it bubble up, ruining the coat. Not worth doing that unless you plan to respray the section after. Learnt from experience on this one.

  24. 2 Thanks to nephilim:

    Arthur (28th July 2013), mac_shinobi (28th July 2013)



SHARE:
+ Post New Thread
Page 1 of 2 12 LastLast

Similar Threads

  1. Cars - Maths in Motion install help
    By tosca925 in forum Educational Software
    Replies: 5
    Last Post: 8th March 2012, 01:58 PM
  2. Help me find a driver for Ghost Cast Boot Disk
    By ninjabeaver in forum Hardware
    Replies: 6
    Last Post: 26th September 2005, 11:50 AM
  3. Ghost 8 +PXE boot into ghost console
    By Inox in forum How do you do....it?
    Replies: 4
    Last Post: 9th August 2005, 12:19 PM
  4. Mark Minasi's Forum
    By ChrisH in forum Links
    Replies: 1
    Last Post: 28th July 2005, 09:29 AM
  5. Booting from USB
    By ChrisH in forum Hardware
    Replies: 9
    Last Post: 27th June 2005, 12:15 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •