General Chat Thread, Does anyone fly Quadcopters/Tricopters in General; Hey, thanks for the vids, thoroughly enjoyed watching them all. About the same feeling of serenity as watching a hot ...
18th October 2012, 04:37 PM #46
Hey, thanks for the vids, thoroughly enjoyed watching them all. About the same feeling of serenity as watching a hot air ballon flight.
I especially like the one from within the old keep, castle, tower, whatever........which I realise now, you must have done blind, as it were.
I'm very, very tempted to have a go myself.......I need a new outdoor pursuit. Since I gave up refereeing, I've missed being outdoors, with a purpose other than playing in the garden with the grandboys.
18th October 2012, 09:00 PM #47
Loving the arduino got it hooked up to the computer in the man cave and playing tunes using a speaker I found in my box of cybot bits
18th October 2012, 09:38 PM #48
Going to play with hooking it up to the motor board on this little fella for now.
19th October 2012, 10:19 AM #49
@plexer Great to hear its all working, have you done many projects with microcontrollers?
19th October 2012, 10:49 AM #50
@JAB1a played aruond with some pics years ago but that was using other peoples code and integrating them kept meaning to look into picaxes but didn't get there.
I also backed the digitemp arduino jobby on kickstarter so have some of them coming to play with.
19th October 2012, 10:53 AM #51
You will find arduino a joy compared to PIC's - at least if you were using Microchips native assembly language!
19th October 2012, 11:09 PM #52
I have read the tread with interest and showed my son who loves playing with his toy RC helicopter, he has asked if we can get one and build it together. Had a look over the last couple of days to see what is the best to start with and have come up with the following.
FlySky FS-TH9X-B 2.4G 9CH System (TX + RX) Radio System | eBay
X525 V3 QuadCopter Glass Friber Folding ARF PNP Set KK Flight Board Multicopter | eBay
do you think they will be ok to start off with.
3 Thanks to JOrdan01070:
Gibbo (5th November 2012), mossj88 (22nd October 2012), plexer (22nd October 2012)
22nd October 2012, 10:35 AM #53
@JOrdan01070 Thats a great first setup, thats the frame I use at the moment but with quite abit of modification. If your son is very good on his heli then the KK board will be fine but if you want 'auto-standle' and hight hold etc then you will need a flight controller with accelerometer/Baro, I started with no expericence with heli's etc and I found the KK board was too steap on the learning curve. I suggest Rabbit flight Controller by Love Flight (get the one with 'Care-Free' and the hi-precision Baro),or a CIRUS AIO Pro, both should be under £100 and are worth every pennie.
The radio gear is spot on, thats a great deal and have heard them mentioned many times in forums for FPV etc
Also grad yourself some 9x4.5 Props (plenty of them!) as you will be needing to replace them if they get damaged because they can just shed part of a prop in mid flight and end with an expensive crash if you fly with bad props.
P.s extra hint, take off or cover the bottom of the feet on the quad as they tend to grab/get stuck in the ground. Oh and Locktight, plenty of locktight!
Thanks to JAB1a from:
Gibbo (5th November 2012)
22nd October 2012, 12:50 PM #54
jab1a cheers for the extra info there is a x525 kit with a cirus multiwii se flight controller for around the same price, will see about getting that instead.
22nd October 2012, 01:03 PM #55
Looks like I know which tx/rx I'll get now then
22nd October 2012, 02:48 PM #56
Hmm do you think at 10 months my sons too young for me to use the but it's for father/son bonding excuse?
Thanks to mossj88 from:
plexer (22nd October 2012)
22nd October 2012, 02:50 PM #57
Erm nah I wouldn't have thought so.
Looking at that radio gear again the postage looks high especially if I then get stung for import duty.
22nd October 2012, 02:53 PM #58
I think I'll carry on keeping my eye out for a used set...
There is one but it uses the KK Board -
x525 v3 quadcopter multicopter with skywalker quatro speed controller assembled | eBay
22nd October 2012, 03:25 PM #59
The KK board is still an AMAZING bit of kit, its alittle harder to setup the ESC etc as you have to do them each on thier own and also seting up the settings can be fiddly/prop breaking intense with roll/pitch/yaw all adjusted by a variable resistor, also you will need the USB Uart to flash firmware etc added bonus is there are a ton of youtube vids on how to setup the KK up.
Its abit pricey but you can get the kits from Pyramid models UK:
Multicopter Kits > MULTICOPTERS > Main Page > Pyramid Models
Flight Control Boards > MULTICOPTERS > Main Page > Pyramid Models
I have brought from them before, they also have a ebay store. Super fast postage and good communication.....but as I said, alittle bit more pricey but then they are in the UK so you can shout at them if things go wrong
Here is another one of my vids I did last week:
Launceston Castle, Launceston, Cornwall:
FPV Quadcopter Launceston Castle, Cornwall UK - YouTube
5th November 2012, 02:44 PM #60
I finally have my full FPV gear. I brought Fat Shark Attitude SD goggles.
Here is the uncut/editted video of my first true FPV flight. I was so excited and luved every second of it
FPV Quadcopter My First True FPV Flight - YouTube
By gwendes in forum Windows
Last Post: 5th February 2007, 09:45 AM
By e_g_r in forum Educational Software
Last Post: 24th June 2006, 07:53 PM
By ChrisH in forum Hardware
Last Post: 23rd June 2006, 11:24 PM
By MrDylan in forum Windows
Last Post: 12th April 2006, 12:55 AM
By timbo343 in forum Windows
Last Post: 22nd March 2006, 12:38 AM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Tags for this Thread