These steps need to be performed to make Configurable USB Loader try to launch IOS248 or IOS224 at startup. If you do not perform these steps, you will get an IOS249 is a stub message when trying to use the loader. There are several options that you can use.
Perform only one of these bulleted sets of steps (your choice):
•Download a pre-configured meta.xml for IOS248: 1.Download the pre-configured meta.xml (right-click the link then choose Save Link As or a similar option).
2.Replace sd:/apps/USBLoader/meta.xml with the downloaded one.
•On a Windows machine, you can use the Configurator, included in the Cfg zip package you downloaded: 1.To start the Configurator, execute the CfgLoaderConfigurator app which will be located in sd:/usb-loader if you followed the above instructions. ■Alternatively, extract the usb-loader directory in the zip file to your hard drive to get a copy of the Configurator.
2.Select the Global Options 3 tab.
3.Select either 248 or 224-mload from the ios drop-down box depending on your preferred choice of IOS (248 is recommended).
4.Ensure the check box to the left of the ios box is now checked (it should have done so when you selected the ios option).
5.Select the Meta Arguments tab.
6.Click the Global Options 3 check box to make it checked
7.Click the Read meta.xml button and select sd:/apps/USBLoader/meta.xml, then push OK.
8.Click the Write meta.xml button and push OK to replace the existing file with the one with a new included option.
•On any machine, open sd:/apps/USBLoader/meta.xml in your favourite text editor and do the following: 1.Find the line </app> towards the end of the file.
2.Depending on which ios you want to use as default (248 is recommended) add one of the lines below before </app>: ■<arguments><arg>ios=248</arg></arguments>
■<arguments><arg>ios=224-mload</arg></arguments>
3.Save your changes to meta.xml.
4.Configurable USB Loader is now ready to be used. Check the information below to see how to use it.
