Printable View
Does anyone know how to project to a screen from an iPad wirelessly?
I've heard of different solutions but not quite sure if its reliable in a classroom.
We have the Casio Bulbless projectors with HDMI ports so I think it should be possible with our current equipment?
Have a look at Apple TV. This would plug into the HDMI port of your projector.
Apple TV and your iPad then talk wirelessly via your Wireless Access Points (WAPs).
Buy an Apple TV (Approx £80) and then use airplay.
Simples. Only issue is sound...
This is true. Apple offer only optical digital out. Without an amplifier with native optical digital in, or some form of converter to phono (left and right channels), getting sound out of it is problematic.
Or if you have a desktop already connected to your projector you could try Air Server
Luckily the networked projector we have also has an iPad app. We find it useful to ask our guest speakers to install the app on their iPad or laptop etc before arriving. Only useful I guess if you have a Networked projector or are looking at getting one... otherwise I'd be looking down the Apple TV route.
What make of projector is that?Quote:
Originally Posted by pslater
We use airserver here. Works well.
+1 for Airserver. $3.99 per computer too!
Epson - Uses the Epson EasyMP Network Projection software...Can't remember the exact model of projector off the top of my head.Quote:
Originally Posted by tj2419
We have the casio xj-m130s plug in an apple tv using HDMI and use the audio out jack on the projector to then either run phono into a set of speakers of jack to jack into the 2nd audio input of the promethean boards.Quote:
Originally Posted by zag
Then just change the audio out on the projector to line out rather than speaker
We have VGA projectors and apple TVs set up, all you need to do is buy a simple adapter to go with it that takes the HDMI from the Apple TV and allows you to plug VGA and sound into the Apple TV... Here is a link for the cable http://store.apple.com/uk/product/H9...rojector-cable
Matthew
Airserver started working well for us, we've also got two Apple TVs, but it's very hit & miss now... Sometimes they show up on the iPad, sometimes they don't... You can be in a classroom and it finds nothing, then walk down the corridor and it finds some/all... despite the wireless coverage being excellent everywhere...Quote:
Originally Posted by tj2419
Not been able to find any reasons for this, but it's put a lot of people off using Airserver.
We are looking at rolling out appleTV's to most classrooms in our school. We currently have around 30 units out there at the moment.
Though Apple TVs can be a bit flaky at times and can decide that they dont want to play with the wireless all the time.
We also use some of the Kanex adpaters as linked above and we also use a lindy switch which takes an hdmi input (apple tv) and vga + audio feed from the pc and sends the output down VGA to the projector and gives an audio feed for an amp.
Another option for the optical audio is to get a optical to rca adapater, about 20 quid off ebay.
To remove as many HDCP issues the best option is to connect the AppleTV direct to the projectors hdmi port if it has one.
We have stayed away from airserver as our PC's are wired and we wouldn't want them to be pulling everything over the wireless.
Does anyone have more details on air servers support of Vlans or first hand experience of cross Vlan use?
Any more information on licensing? A number of our computers are provisioned so this might prove an issue depending how it's handled, little information is given on the AirServer website.
Similar boat here, trying to save money by not going down the flaky atv route but stuck on VLAN, can't think of a solution at the mo.
For sound, if you're using those casio projectors they have speakers built in, the audio goes over hdmi and works fine (well it did on the test unit I have here)