+ Post New Thread
Results 1 to 7 of 7
AV and Multimedia Related Thread, Sanyo PLC-XE40 power up problem in Technical; Sanyo PLC-XE40 power up problem We have just put a brand new bulb into this projector but I cant get ...
  1. #1

    Join Date
    Jan 2008
    Location
    Essex / Suffolk border
    Posts
    197
    Thank Post
    36
    Thanked 26 Times in 16 Posts
    Rep Power
    18

    Sanyo PLC-XE40 power up problem

    Sanyo PLC-XE40 power up problem

    We have just put a brand new bulb into this projector but I cant get it to power up. I have a power light - red and the bulb warning light as orange, but projector will not start up. Have checked the Thermal Switch as per other threads in this forum, and switch is down. I'm not getting any response from the remote control and have tested it on another board and the remote works fine. Tried another brand new bulb but still the same. Any one with any ideas? Thanks

  2. #2

    Join Date
    Dec 2007
    Location
    Grimsby Lincs
    Posts
    314
    Thank Post
    0
    Thanked 53 Times in 38 Posts
    Rep Power
    38
    Sounds like you have lost the remote code, it is an easy reset but i will not put it on the board to make it common knowlage for obvios reasons, if you want to ring either your supplier they should talk you through it, if not let me know and i will ring you and assist you with it.
    It is a security feature and should not be open on a board for everyone to see for that reason.

    Marc
    Projector Engineer

  3. Thanks to Marc-Engineer from:

    bertster (28th March 2011)

  4. #3

    Join Date
    Jan 2008
    Location
    Essex / Suffolk border
    Posts
    197
    Thank Post
    36
    Thanked 26 Times in 16 Posts
    Rep Power
    18
    Thanks Marc - PM send to you

  5. #4
    mattbrown02
    Guest
    We recently lost and replaced the remote for our only PLC-XE40 at a cost of nearly 100, but the projector will not respond to the new remote. Is there something we need to do in order to use the new remote?

  6. #5

    Join Date
    Dec 2007
    Location
    Grimsby Lincs
    Posts
    314
    Thank Post
    0
    Thanked 53 Times in 38 Posts
    Rep Power
    38
    Yes, but for security, i cant put it on a board for public view, so PM me here with your phone and i will ring you and help you to do it, you will need the projectopr connected and the remote.

    Marc
    Projector Engineer

  7. #6

    Join Date
    Apr 2014
    Posts
    1
    Thank Post
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Just bought the same Plc -xe 40 projector but bought the remote separate. Wondering if I can get help on matching it up to the projector.

  8. #7
    MbroTech's Avatar
    Join Date
    Mar 2009
    Posts
    72
    Thank Post
    2
    Thanked 9 Times in 4 Posts
    Rep Power
    17
    If it is just switching between the two IR channels then the instructions are also in the manual I think.

    Students here seem to know it somehow anyway. I am always having to reset the remotes - although maybe they are actually changing the channel on the projector which is a menu item but has the same effect.

SHARE:
+ Post New Thread

Similar Threads

  1. Cleaning the Sanyo PLC-XE40 projector
    By Gromit in forum Hardware
    Replies: 77
    Last Post: 3rd May 2013, 09:05 PM
  2. Sanyo PLC XE40 not shutting
    By akidosaint in forum How do you do....it?
    Replies: 1
    Last Post: 11th February 2011, 02:29 PM
  3. Sanyo PLC-XE40 will not startup
    By Skinny in forum Hardware
    Replies: 5
    Last Post: 8th October 2010, 02:33 PM
  4. Sanyo PLC-XE40 Fault
    By alameals in forum Promethean Direct Support
    Replies: 5
    Last Post: 23rd September 2010, 10:17 AM
  5. Sanyo PLC-XE40 Projector Not Starting Up
    By avr34 in forum Hardware
    Replies: 0
    Last Post: 28th August 2010, 10:35 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •