AV and Multimedia Related Thread, SMARTBoard Problems in Technical; Another strange problem for the people of the world, we had a SMARTBoard 600 series installed during the summer break, ...
2nd October 2009, 09:44 AM #1
Another strange problem for the people of the world, we had a SMARTBoard 600 series installed during the summer break, we have build a purpose build WB machine for the job of controling it. we installed all the software from the disk as per usual, but when it came to Callibration time the flashing cross in the top left corner (the first one you press) it flashes for about 3 secs then stops the pens do not interact with the board and has to be Escaped out of, the strange thing is the PC sees the board but does not react to it all lights are green it knows its there but still the problem any ideas.
IDG Tech News
2nd October 2009, 09:58 AM #2
Could be that the layers within the board itself are stuck together. There is a membrane under the white board surface, if this becomes stuck then the board doesn't work properly. (Had that here on a couple of boards).
Trying using a soft cloth and applying gentle pressure to the board and rubbing it all over to see if that is indeed the problem and releases it.
There is also a reset button near to where the USB cable fits into the board (you'll need to use a pen for this). Board may also need a physical reset.
Hope this helps.
Thanks to seanmh from:
VanLerswin (2nd October 2009)
2nd October 2009, 10:27 AM #3
Awesome matey that has worked a treat - cheers
By badcommander in forum Hardware
Last Post: 6th May 2011, 04:51 PM
By neon in forum Hardware
Last Post: 17th September 2009, 08:09 PM
By daz5505 in forum Windows
Last Post: 15th September 2009, 06:39 PM
By treetops in forum AV and Multimedia Related
Last Post: 11th March 2009, 12:57 PM
By jcollings in forum Hardware
Last Post: 16th November 2007, 06:47 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)