Have a look at Drivers and Downloads - Lamp - ELPLP50 - EB-84/85/825/826/824 - Epson
You'll need to contact Epson if you don't have the user guide.
Hello Please can you help.
A teacher has entered the unlock code into a projector unsuccessfully. Now we have a screen with a request code 49100 and a message saying see your documentation. But we have no documentation for this projector !! please help !! also how do I go about getting the correct unlock code.
I have several of the same projectors and if memory serves me right, if you remove the power from the projector (physically remove the IEC lead for several minutes e.g. 10) then when you turn it on it should ask you again for the code. The default Epson code should be 1793.
Hope this helps,
Fontayne56 (25th October 2013)
Perfect Thank you sooooo much worked a treat !! only have two of these and we didn't install them. Thank you thank you thank you
Regular occurrence in our school. We have had a few Epson EB projectors turn up with 0000 as the passcode as well as the standard 1793 mentioned above.
Anyone had an issue with an Epson projector that simply won't accept any input from a remote control? Our Epson is asking for a password, which I know, but I can on;y turn the projector on or off with the remote, not enter the code! I've tried with a different epson remote with no dice either...
How many different types of remote have you tried? I have four different types of Epson remote on my desk and some will turn on some projectors but not allow you to put in the code. Trial and error is the only way I've found...
To answer my own question, it really helps if you read the manual.
You have to hold down the Num button whilst inputting the code, seems obvious now but it wasn't at the time!
There are currently 1 users browsing this thread. (0 members and 1 guests)